PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : Neptune ECU RPT



SPY#-2194
27.02.2009, 14:29
Hat einer Erfahrungen mit der Firma Neptune?
Ist die Firma qualitätsmäßig vertretbar? hat Jemand hier evtl. schonmal mit ner ECU/Chip von denen gearbeitet? Mir ist die Firma gänzlich unbekannt. Und passt eine P75 ECU in nen ITR!? P73 ist ja serie. Jetzt ist die Frage ob eine gechipte P75 im Teg funktioniert.

eg4
27.02.2009, 16:11
p75 ecu kann kein VTEC. Das Neptune RTP ist sicher sehr gut, nur ist die Frage ob man RTP wirklich braucht, ich meine wie oft lässt man sein Auto abstimmen. Meiner Meinung ist eine gechippte P28/P30 immer noch the best bang for the buck

SPY#-2194
27.02.2009, 16:13
Gut, sagen wir so, wenn man jetzt zu nem "Geschenkpreis" an so ein gerät kommt. Aber kein VTEC ist dann ja Schwachsinn. Somit für mich uninteressant.

Edit: Komisch. Zu dem Teil steht das hier dazu!? kan ndas durch den Chip nun doch VTEC?

*Rev Limits/VTEC
High and Low Cam Rev Limits Low cam rev limit doubles as a cold limit High and Low Load VTEC Engagement RPMs Separate engagement RPMs for low and high load TPS threshold decides low/high load This option decides whether to use the low or high load engagement RPM Minimum load for engagement This option only allows VTEC to engage above the specified load Disengage below minimum load When VTEC is engaged this option determines whether or not to disengage below the minimum load or disengage below the set engagement RPM Minimum Speed
Minimum ECT
VTEC Disable For Non-VTEC setups VTEC Speed Threshold Disable Allows VTEC to activate at launch or on setups without a VSS VTEC Temperature Threshold Disable Allows VTEC to activate while the car isn’t fully warmed up VTEC Pressure Disable For setups without a VTEC Pressure switch VTEC Error Check Disable Only suggested for race vehicles

eg4
27.02.2009, 16:21
Neptune kann VTEC, aber die ECU muss das natürlich auch können

SPY#-2194
27.02.2009, 16:23
Ah, k! Was kost so ein neptune normalerweise? Nur das ich weiß, wann ich ein Schanäppchen machen kann. :-)

Dank dir schonmal für die Infos Matze! :wink: :up: In Sachen ECU etc. hab ich halt null Ahnung bis dato! :-)